Barco PHWU-81B User And Installation Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. PHWU-81B
  6. User and installation manual

Barco PHWU-81B User And Installation Manual

Ph series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PHxx series
User and Installation manual
R5905597/02
20/05/2014

Advertisement

Table of Contents
loading

Related Manuals for Barco PHWU-81B

Summary of Contents for Barco PHWU-81B

  • Page 1 PHxx series User and Installation manual R5905597/02 20/05/2014...
  • Page 2 Barco nv Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Hyogo Japan...
  • Page 3 Copyright © All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco. Federal Communications Commission (FCC Statement) This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC rules.

  • Page 5: Table Of Contents

    Table of contents TABLE OF CONTENTS 1. Safety ....................... .. 5 General considerations.
  • Page 6 13.4 Specification of RGB signals in each computer mode of the projector For PHWU-81B ......
  • Page 7 Table of contents Glossary ....................... 135 Index.
  • Page 8 Table of contents R5905597 PHXX SERIES 20/05/2014...

  • Page 9: Safety

    Select your product and navigate to the User Manual. Click on the PDF link to open the User Manual. About the term PHxx series The following projectors are included in the term PHxx series : PHWU-81B, PHWX-81B and PHXG-91B General considerations Safety labels The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to...

  • Page 10: Using Projector In Europe

    Any changes or modifications not expressly approved by Barco could void the user’s authority to operate this equipment. Important safety instructions General •...
  • Page 11 Caution: High pressure lamp may explode if improperly handled. Refer servicing to qualified service personnel. The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to Barco. •...
  • Page 12 1. Safety To prevent the risk of electrical shock • Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury. • Use 100-240 V AC 50/60 Hz to prevent fire or electric shock. •...
  • Page 13 1. Safety To prevent projector damage • Unplug this projector from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning. • Do not use this projector near water or in contact with water. •...
  • Page 14 1. Safety About batteries • Use of a battery of wrong type may cause explosion. • Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries should be used. • For disposal of used batteries, always consult federal, state, local and provincial hazardous waste disposal rules and regulations to ensure proper disposal.

  • Page 15: Preparing The Projector

    2. Preparing the projector 2. PREPARING THE PROJECTOR Overview • Projector accessories • Terminology overview • Installation of the batteries into the remote control • Using the remote control • Projector configurations • Location of ceiling mounting holes • Screen setup •...

  • Page 16: Terminology Overview

    2. Preparing the projector Terminology overview Remote control Image 2-1 ON/OFF / POWER key (ON/STANDBY) The status is changed between ON and STANDBY. Transmission windows Indicators ▲, ►, ▼, ◄ keys OK/ENTER key HOME/MENU key Battery compartment Top and side projector Image 2-2 Remote control sensor (front) STATUS Led...
  • Page 17 2. Preparing the projector Intake vent/Filter cover (inside of the side cover) Intake vent Lens Terminal panel (inside of the rear cover) Remote control sensor (rear) Exhaust vent 10 Lamp cover (inside of the slide cover) Bottom side projector Image 2-3 Lock bar (SECURITY ANCHOR) Attach a chain, etc.

  • Page 18: Installation Of The Batteries Into The Remote Control

    2. Preparing the projector HDMI IN terminal (HDMI 19-pin) COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal (DVI-D 24-pin) SDI IN terminal (for PHWU-81B only) LAN terminal REMOTE1 IN terminal (D-SUB 9-pin female) 10 SERIAL IN and OUT terminals (D-SUB 9-pin male) 11 REMOTE 2 IN and OUT terminals Do not use these terminals.

  • Page 19: Using The Remote Control

    2. Preparing the projector Using the remote control Operational range Direct pointing Operate the remote control within a distance of 15 m (49.2 feet) from the projector, pointing the light beam at the remote control photo-sensor (front or rear) of the projector. ±...

  • Page 20: Rear Projection

    2. Preparing the projector Projector configurations Front projection The projector is installed, either in a table mount or ceiling mount configuration, at the same side of the screen as the audience. Image 2-9 For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation. For details, consult your dealer.

  • Page 21: Location Of Ceiling Mounting Holes

    2. Preparing the projector Location of ceiling mounting holes Location Image 2-11 A : 4 mounting holes for ceiling mount plate. (M4, depth 10 mm) Screen setup Environment check Before setting up the projector, check the operating environment. If the environmental requirements are not satisfied, the projector may break down or fail.
  • Page 22 Fornt projection Front projection, ceiling mounted Maximum projection area Center of the lens For PHWU-81B, when the aspect ratio is “FULL” (Display at 1920 x 1200 pixels) Size of projector image (16:10) Projector distance (L) Lens shift height Lens shift...
  • Page 23 2. Preparing the projector For PHWX-81B, when the aspect ratio is “FULL” (Display at 1280 x 800 pixels) Size of projector image (16:10) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H) Shortstr Longest Movement Movement Movement size...

  • Page 24: Correcting Skewed Or Distorted Image

    2. Preparing the projector Correcting skewed or distorted image Problem For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector. Image 2-13 Screen Adjustable feet...

  • Page 25: Connections

    3. Connections 3. CONNECTIONS Preparations To get access to the connections, the covers of the projector must be removed. AUTION Only authorized service personnel are allowed to remove the covers. Removing the covers ARNING Make sure that the power of the projector is turned off. Removing the side cover 1.

  • Page 26: Power Connection

    3. Connections Image 3-2 Rear cover removal Power connection ARNING In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

  • Page 27: Connecting The Projector To A Computer

    3. Connections Take care for the following points • Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord. • Do not plug in or out the power cord with your hand wet. It may cause electric shock. •...

  • Page 28: Connecting The Projector To Video Equipment

    3. Connections Computer cable (option) Connector to Video1 2. Connect the other end of the BNC cable to the 5 BNC terminals of the monitor port of the computer. Digital connection to DVI-D IN 1. Connect one end of a commercially available DVI cable to the COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal of the projector.
  • Page 29 3. Connections Image 3-7 BNC plug Video player or the like BNC-RXA adapter (optional) To video output terminal B?C cable (optional) To VIDEO IN terminal (BNC) 2. Connect the other end of the BNC cable to the video output terminal of the video equipment. Connecting to video equipment, equipped with S-Video 1.
  • Page 30 3. Connections • HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the purpose of copy protection. • HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer electronics devices incorporating the DVI standards.

  • Page 31: Installing The Rear Cover

    3. Connections Installing the covers Installing the rear cover 1. Insert the rear cover (e) into the projector and tighten four screws (d) on the rear cover using a Phillips screwdriver. Image 3-12 Rear cover mounting Installing the side cover 1.
  • Page 32 3. Connections R5905597 PHXX SERIES 20/05/2014...

  • Page 33: Getting Started

    4. Getting started 4. GETTING STARTED Basic Remote control, indications Overview Image 4-1 ON/OFF HOME ARROW RIGHT (►) ARROW UP (▲) ARROW LEFT (◄) ARROW DOWN (▼) LED INDICATION BATTERY COMPARTMENT IR LEDs R5905597 PHXX SERIES 20/05/2014...

  • Page 34: Osd Lite Navigation Results

    4. Getting started Basic actions Result RCU Lite: action start the projector press on/off turn off the projector press on/off > show main menu on screen press home move through menu press arrow keys select button press ok select and return to previous menu press ok return to previous menu without selecting press home...
  • Page 35 4. Getting started Hotkey / Short Cut RCU Lite → OSD Lite Remote Command result action → on screen to quick adjust a burry screen > > mute picture and sound on the projector > unmute picture and press any key sound on the projector main menu is on screen, go to button required RCU Lite →...

  • Page 36: Projecting Images

    4. Getting started main menu is on screen, go to button required RCU Lite → OSD Lite result Action → on screen > adjust keystone and/or and/or > select language > go to lamp mode desired (default setting = NORMAL >...

  • Page 37: Stop Projecting Images

    4. Getting started It may take about 2 minutes for the lamp to light up. The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again. After the ON/OFF key is pressed, the image may flicker before the lamp becomes stable. This is not a product malfunction. The lamp operation becomes stable in 2 minutes after the power is turned on and then the lamp mode selected in the menu is activated.

  • Page 38: Direct Power Off

    4. Getting started The STATUS Led will go out. If the power cord should be unplugged accidentally while either the air inlet fan or the air outlet fans are operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the lamp again, press the ON/OFF key. If the lamp doesn’t light up immediately, press the ON/OFF key a few minutes later.

  • Page 39: When The Projected Image Is Distorted Or A Trapezoid

    4. Getting started When the ▼ key is pressed, the image moves down. When the ▲ key is pressed, the image moves up. When the ► key is pressed, the image moves to the right. When the ◄ key is pressed, the image moves to the left. Be careful not to be caught in the opening in the lens while the lens is moving.

  • Page 40: Blanking The Screen Temporarily

    4. Getting started Image 4-9 4. Adjust the keystone by pressing the ▲, ◄, ▼ or ► key. In the following cases (for front projection): Image 4-10 5. Press the ON/OFF, OK or HOME key to exit the menu. Important •...

  • Page 41: Auto Position Mode

    4. Getting started The MUTE screen appears. “MUTE ON - PRESS ANY KEY TO EXIT” is displayed for 3 seconds. Then, the mechanical shutter is closed and the projector goes into the BLANK mode. 2. To cancel the BLANK mode, press any key on the remote control. Auto position mode Act as follow When the image supplied from the computer is displaced, carry out the following procedure.
  • Page 42 4. Getting started R5905597 PHXX SERIES 20/05/2014...

  • Page 43: Advanced Menu

    5. Advanced menu 5. ADVANCED MENU Starting the advanced menus How to set 1. Press HOME key to display the OSD Lite menu. Image 5-1 2. Use the arrow keys to select ADVANCED and press OK. The enter password menu is displayed. Image 5-2 3.

  • Page 44: Advanced Menus Overview

    The menus and screens shown in this manual may be different from those of the actual projector. Advanced menus overview Overview You can make various settings using the displayed menus. Following 8 menus are displayed. (These menus show those of PHWU-81B. Some menu items are different depending on the models.) IMAGE menu INSTALLATION 1 menu...
  • Page 45 5. Advanced menu INSTALLATION 2 menu MULTI-SCREEN menu MULTI- MULTI- IMAGE INSTALL1 INSTALL2 SCREEN FEATURE SIGNAL NETWORK INFO IMAGE INSTALL1 INSTALL2 FEATURE SIGNAL NETWORK INFO SCREEN AUTO POWER ON EDGE BLENDING SETTING AUTO POWER OFF 5min EDGE ADJUST SCREEN COLOR MATCHING 16:10 MANUAL SETTING...

  • Page 46: Image Menu

    5. Advanced menu Image menu Overview INSTALL1 INSTALL2 MULTI- INSTALL1 INSTALL2 MULTI- IMAGE SCREEN FEATURE SIGNAL NETWORK INFO IMAGE SCREEN FEATURE SIGNAL NETWORK INFO ADVANCED MENU COLOR ENHANCER AUTO NOISE REDUCTION SUPER RESOLUTION CONTRAST INPUT LEVEL BRIGHTNESS CLOSED CAPTION COLOR MATRIX COMPUTER DEMO MODE COLOR TEMP.
  • Page 47 The effect obtained when SUPER RESOLUTION is ON varies depending on the type and resolution of the input image. In addition, the vertical line of the colored characters may be blurred. • When the COMPUTER1, COMPUTER2, DVI, HDMI or SDI (for PHWU-81B only) is selected as the input source, COLOR and TINT can’t be adjusted. •...

  • Page 48: Installation 1 Menu

    5. Advanced menu Installation 1 menu Overview INSTALL2 MULTI- INSTALL2 MULTI- IMAGE INSTALL1 SCREEN FEATURE SIGNAL NETWORK INFO IMAGE INSTALL1 SCREEN FEATURE SIGNAL NETWORK INFO LENS LOCK LAMP MODE STANDARD LAMP SELECT ZOOM/FOCUS LOCK DUAL LENS SHIFT LOCK LAMP RELAY 1H/24H LENS SHIFT RESET STANDBY MODE...

  • Page 49: Installation 2 Menu

    Function GEOMETRY The geometry adjustment menu is displayed. ENTER TEST PATTERN The test pattern is displayed. ENTER SPLIT (for PHWU-81B/ The split screen is displayed. ENTER PHWX-81B only) PIP (for PHXG-91B only) The picture-in-picture (PIP) screen is displayed. ENTER AUTO POSITION The auto position function is activated.

  • Page 50: Multi-Screen Menu

    Select POWER or NONE. PIN 3 COMPUTER 1 You can assign COMPUTER 1, COMPUTER 2, VIDEO, S-VIDEO, DVI, HDMI, SDI (for PHWU-81B only), or NONE to each pin. Though the assignment can be duplicated, the pins so assigned become PIN 4 COMPUTER 2 invalid and their settings are displayed with asterisks at both ends (like “*COMPUTER 1*”).

  • Page 51: Feature Menu

    5. Advanced menu Item Setting Function RESET Use to reset the values of EDGE ADJUST , BLACK LEVEL BRIGHT UNIFORMITY CORRECTION to the defaults. COLOR MATCHING Select this option when the projector is used alone. MANUAL Select this option when adjusting colors while viewing the screen to correct color variations among the projectors.
  • Page 52 5. Advanced menu Item Setting Function FILM Fixed to the film mode. VIDEO The film mode will not be activated. LANGUAGE Different languages Use to select the language used in the menus. ADVANCED MENU The ADVANCED MENU is displayed for the following settings. ENTER VIDEO SIGNAL AUTO / NTSC / PAL /...

  • Page 53: Signal Menu

    5. Advanced menu SIGNAL menu Overview IMAGE INSTALL1 INSTALL2 MULTI- IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO SCREEN FEATURE SIGNAL NETWORK INFO RESOLUTION (MEMORIZE) MEMORY CALL AUTO VERTICAL SIGNAL MEMORY MEMORIZE 60.00 Hz FREQUENCY RESOLUTION HORIZONTAL 1024 x 768 48.36 KHz (MEMORIZE ) FREQUENCY...
  • Page 54 ASPECT NORMAL For PHWU-81B: Input video signal is displayed at the max height (1200 pixels) or max width (1920 pixels) of the panel while its aspect ratio is maintained. → When SCREEN is 16:9, the input video signal is displayed at the max height (1080 pixels) or max width (1920 pixels) of the panel.

  • Page 55: Network Menu

    AUTO for normal use. ON / OFF Use to select whether or not to enable the LPF. SHUTTER(U) 0-259 (for PHWU-81B) / Use to adjust the image when noise appears on the top part of the 0-142 (for PHWX-81B) / image.

  • Page 56: Information Menu

    5. Advanced menu Item Setting Function NETWORK Select whether to enable the network certification or not. Select OFF / OFF CERTIFICATION for normal use. IP CONFIG Select this setting for IP Configuration. ENTER DHCP Select this setting when you obtain IP CONFIG automatically by DHCP server.
  • Page 57 5. Advanced menu Item Description LAMP 2 TIME (LOW) This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP 2 is LOW. → When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than the actual time.
  • Page 58 5. Advanced menu R5905597 PHXX SERIES 20/05/2014...

  • Page 59: Adjustments With The Advanced Menu

    6. Adjustments with the ADVANCED menu 6. ADJUSTMENTS WITH THE ADVANCED MENU To adjust the brightness (CONTRAST and BRIGHTNESS) How to adjust 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the ▲ or ▼ key. 3. Adjust the selected item by pressing the ◄ or ► key. 4.

  • Page 60: Color Enhancer

    6. Adjustments with the ADVANCED menu How to select 1. Display the IMAGE menu. 2. Select COLOR TEMP. by pressing the ▲ or ▼ key. 3. Select your desired color temperature by pressing the ◄ or ► key. 4. To cancel the menu, press the MENU key. To customize the color temperature 1.

  • Page 61: Adjusting The Fineness Of The Image (Super Resolution)

    6. Adjustments with the ADVANCED menu 5. Select an item you want to set by pressing the ▲ or ▼ key. GAMMA mode Use this item to set the gamma optimally. When USER is selected: DYNAMIC Select when viewing images supplied from the computer. NATURAL Select when viewing images supplied from the video device.

  • Page 62: Setting The Screen Size

    Image 6-8 3. Select your desired aspect ratio by pressing the ◄ or ► key. You can select the aspect ratio from 16:10 (for PHWU-81B/PHWX- 81B only), 16:9, and 4:3. 4. To cancel the menu, press the MENU key. Setting the aspect ratio About aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image).
  • Page 63 3. Select your desired aspect ratio by pressing the ◄ or ► key. Select the aspect ratio from NORMAL, 16:9, NATIVE (for PHWU-81B/PHWX-81B only), 4:3, and FULL. When 16:9 is selected by SCREEN in the INSTALLATION 2 menu, 16:9 cannot be selected.

  • Page 64: Adjusting The Detailed Setting Of Aspect

    6. Adjustments with the ADVANCED menu WXGA signal 16:10 16:9 16:10 16:10 1280 x 800 (16:10) 1280 x 800 1280 x 720 1280 x 800 1066 x 800 1280 x 800 WXGA signal 16:9.6 16:9 16:9.6 16:10 1280 x 768 (16:9.6) 1280 x 768 1280 x 720...

  • Page 65: Saving The Setting In The Signal Memory

    When the supplied image is not projected on the entire display area, the horizontal location of the projected image can be adjusted within the area. The setting range is -960 to +960 (for PHWU-81B), -640 to +640 (for PHWX-81B), or -512 to +512 (for PHXG-91B).

  • Page 66: Adjusting A Computer Image

    6. Adjustments with the ADVANCED menu 2. Select SIGNAL MEMORY while AUTO is selected in the MEMORY CALL by pressing the ▲ or ▼ key. 3. Select MEMORIZE and press the ENTER key. 4. Select your desired memory number by pressing the ◄ or ► key. 5.

  • Page 67: How To Adjust The Image Supplied From The Computer Using The Menu

    6. Adjustments with the ADVANCED menu When the size and position of the computer image are not correct. Pr oject a bright computer image containing as many texts and characters as possible. Note) Disable the screen saver if it is active. Select AUTO POSITION in the INPUT menu of the OSD Lite menu and press the OK key.

  • Page 68: Simple Method To Adjust The Image Position

    6. Adjustments with the ADVANCED menu The projected image is displaced horizontally. Adjust HORIZ. POSITION in the SIGNAL menu. Every time the ◄ key is pressed, the image moves to the right. Every time the ► key is pressed, the image moves to the left. The projected image is displaced vertically.
  • Page 69 START Set the position to start the edge adjustment. POSITION When UP or LOW is selected: • 0 to 270 (for PHWU-81B) • 0 to 192 (for PHWX-81B/PHXG-91B) When LEFT or RIGHT is selected: • 0 to 480 (for PHWU-81B) •...

  • Page 70: Adjusting The Color Variations

    6. Adjustments with the ADVANCED menu 14.Select a setting value by pressing the ◄ or ► key. 15.Repeat step 13 and step 14, if necessary. 16.Press the MENU key once. 17.Select BRIGHT UNIFORMITY CORRECTION by pressing the ◄ or ► key. BRIGHT UNIFORMITY SETTING CORRECTION...

  • Page 71: Resetting The Settings

    6. Adjustments with the ADVANCED menu MANUAL – SETTING COLOR GAIN SATURATION WHITE R - - - - - - WHITE G WHITE B - - - AUTO PATTERN Image 6-20 7. Select an item you want to set by pressing the ▲ or ▼ key. Select the color you want to adjust using COLOR.

  • Page 72: When The Projected Image Is Distorted

    6. Adjustments with the ADVANCED menu 6.19 When the projected image is distorted What should happen: When the projected image is distorted, carry out any of the KEYSTONE, CORNERSTONE, and CURVED mode adjustments to correct the distortion. When the image distorts in a trapezoid shape, use the KEYSTONE-mode adjustment. For fine adjustment of the image shape, use the CORNERSTONE-mode adjustment.

  • Page 73: Adjustment Using The Cornerstone Mode

    6. Adjustments with the ADVANCED menu Important • For proper KEYSTONE-mode adjustment results, reset the lens to the factory-adjusted position using LENS SHIFT RESET in the INSTALLATION 1 menu before carrying out KEYSTONE-mode adjustment. • When the KEYSTONE-mode adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.

  • Page 74: Adjustment Using The Curved Mode

    6. Adjustments with the ADVANCED menu Important • When the CORNERSTONE-mode adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions. • When the CORNERSTONE-mode adjustment is performed, the displayed image may be distorted.
  • Page 75 6. Adjustments with the ADVANCED menu Image 6-29 When the horizontal arc adjustment is positive (+) (or the ARC is adjusted in the ▲ direction) Image 6-30 Adjusting the origin to the vertical arc When the vertical arc adjustment is negative (-) (or the ARC is adjusted in the ◄ direction) Image 6-31 When the vertical arc adjustment is positive (+) (or the ARC is adjusted in the ►...

  • Page 76: Changing The Auto Power Off Setting

    6. Adjustments with the ADVANCED menu Image 6-32 When you press the ◄ or ► key in the RESET mode, the distortion correction is reset. Important • When the CURVED-mode adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns.

  • Page 77: Displaying Test Pattern

    6. Adjustments with the ADVANCED menu How to set 1. Display the INSTALLATION 1 menu. 2. Select IMAGE REVERSE by pressing the ▲ or ▼ key. IMAGE REVERSE Image 6-34 3. Select OFF, MIRROR, INVERT or MIRROR INVERT by pressing the ◄ or ► key. 6.22 Displaying TEST PATTERN How to display 1.
  • Page 78 6. Adjustments with the ADVANCED menu R5905597 PHXX SERIES 20/05/2014...

  • Page 79: Initial Network Settings

    7. Initial network settings 7. INITIAL NETWORK SETTINGS Where to find the settings You can set the network of the projector using the NETWORK menu in the ADVANCED menu of the OSD Lite menu. IMAGE INSTALL1 INSTALL2 MULTI- SCREEN FEATURE SIGNAL NETWORK INFO PROJECTOR NAME...

  • Page 80: Enabling Or Disabling The Network Certification

    7. Initial network settings Enabling or disabling the network certification About network certification You can select whether or not to certify the network communication using the network password. For details, contact your dealer. How to enable-disable 1. Display the NETWORK menu. 2.

  • Page 81: Ip Settings

    7. Initial network settings If the entered password is not correct, CURRENT NETWORK PASSWORD screen appears again. NEW NETWORK PASSWORD ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗ CONFIRM NETWORK PASSWORD ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗ ← → caps CLEAR CANCEL Image 7-8 6. Enter the NEW NETWORK PASSWORD and CONFIRM NETWORK PASSWORD. Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.

  • Page 82: Ip Address Settings

    7. Initial network settings How to set or clear 1. Display the IP CONFIG menu. 2. Press the ▲ or ▼key to select DHCP. DHCP Image 7-11 3. Press the ◄ or ► key to select ON or OFF. → When setting DHCP to ON, IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY cannot be set. If you set those settings, set DHCP to OFF and perform the IP settings as the following procedures.

  • Page 83: Default Gateway Settings

    7. Initial network settings SUBNET MASK 0. 0. 0. 0 Image 7-14 3. Press the ENTER key. SUBNET MASK screen appears. SUBNET MASK 255 . 255 . 255 . ← → CLEAR CANCEL Image 7-15 4. Enter the Subnet Mask. Refer to IP Address Settings for the detail of entering.

  • Page 84: Setting The Control System

    7. Initial network settings → The setting change dialog is displayed. After the dialog disappears, the NETWORK menu is displayed. → It may take some time to reflect the settings. Setting the control system How to set 1. Display the NETWORK menu. 2.

  • Page 85: Lamp Relay

    8. Lamp relay 8. LAMP RELAY Overview Using the lamp relay function, you can project images continuously. The lamp relay function automatically rests or switches the lamps. The lamp relay is performed when LAMP SELECT in the INSTALLATION 1 menu is set to DUAL or SINGLE in the AD- VANCED menu of the OSD Lite menu.
  • Page 86 8. Lamp relay → When you select 1H/24H or 2H/1W , the box to set the lamp relay interval is displayed. → When the projector is turned off, the setting is cleared and the projector resumes operation from the time of the power-on or menu setting shown in the preceding step.

  • Page 87: Setting The Lamp Relay Interval, Lamp Select Is Set To Single

    8. Lamp relay Setting the lamp relay interval, LAMP SELECT is set to SINGLE The lamps are automatically switched and used alternately. How to set 1. Display the INSTALLATION 1 menu. 2. Select LAMP SELECT by pressing the ▲ or ▼ key. LAMP SELECT DUAL Image 8-8...
  • Page 88 8. Lamp relay → Maximum interval 24H (24 hours) 7D 00H (7 days and 00 hours) 1 WEEK ← key Shifting the position of enter cursor to the left for each character. → key Shifting the position of enter cursor to the right for each character. DEL key Deleting the character in the position of enter cursor for each character.

  • Page 89: Advanced Features

    9. Advanced features 9. ADVANCED FEATURES Password function About the password function This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users. The password function has 3 modes as follows. DISPLAY INPUT When the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered.

  • Page 90: Cancel The Password Function

    Disable the password by pressing the MENU and ENTER keys on the projector at the same time about 3 seconds Split for PHWU-81B/PHWX-81B only About split You can split the screen in two and display a computer image on the left screen and a video image on the right screen.

  • Page 91: Picture In Picture (Pip)

    The screen is split in two and the left and right screens display the following images: Left Image supplied to the last selected input source, VGA (COMPUTER1), 5BNC (COMPUTER2), DVI, HDMI or screen SDI (for PHWU-81B only) Right Image supplied to the last selected input source, VIDEO or S-VIDEO screen Important •...

  • Page 92: Supervising And Controlling By Computer

    You can supervise and control the projector’s operation using a personal computer via a LAN. Projector Toolset Barco’s Projector Toolset software is a free, userfriendly software package that helps you manage your Barco projectors easily and quickly from one central location, through the network or RS232 connection. Comprising various tools for brightness settings, diagnostics, image adjustment, picture-in-picture and image control, the Projector Toolset is an indispensable tool for efficient visu-...
  • Page 93 12 = COMPUTER2 INPT? 21 = VIDEO 22 = S-VIDEO 31 = HDMI 32 = DVI 33 = SDI (only PHWU-81B only) AVMT Mute control 30 = Video mute disable 31 = Video mute enable AVMT? Inquiry about the mute state...

  • Page 94: Monitoring And Control Using Serial Terminal

    Inquiry about the manufacturer “BARCO” is returned. name INF2? Inquiry about the model name “PHWU-81B”, “PHWX-81B”, or “PHXG-91B” is returned. INF0? Inquiry about other information No other information is available. No parameter is returned. CLSS? Inquiry about the class “1” is returned.

  • Page 95: Control By A Control Panel, Etc

    9. Advanced features Important: In a system using a serial divider, don’t connect the projectors as above. To monitor and control the projectors collectively or individually, it is necessary to assign GROUP IDs to them. Setting GROUP IDs By dividing the projectors into groups, you can monitor and control them collectively by groups. GROUP IDs should be A to Z. You can create up to 26 groups.
  • Page 96 When short-circuiting any of Pin No. 3 to Pin No. 7, you cannot use the following functions. • POWER, BLANK, COMPUTER 1, COMPUTER 2, VIDEO, S-VIDEO, DVI, HDMI, and SDI (for PHWU-81B only) of the remote control and the projector •...

  • Page 97: Lamp Replacement

    10. Lamp replacement 10. LAMP REPLACEMENT 10.1 Lamp replacement warnings Warnings • Be careful not to drop the lamp fixing screws into the inside of the projector. Don’t put a metal piece or flammable object into the projector. Using the projector with any foreign object present inside may result in electric shock or fire. When you can’t remove the foreign object from the inside, contact your dealer for removal.

  • Page 98: Lamp Replacement

    10. Lamp replacement Image 10-1 10.3 Lamp replacement AUTION Only authorized service personnel are allowed to remove the covers. How to replace 1. Unplug the power cord from the outlet or appliance inlet. 2. Loosen two screws (a) on the rear and two screws (b) on the side that are securing the side cover (c) using a Phillips screwdriver. Image 10-2 3.
  • Page 99 10. Lamp replacement Image 10-4 5. Loosen two screws (f) that are securing the lamp box to be removed using a Phillips screwdriver. Image 10-5 6. Pull the handle. 7. Pull out the lamp box by the handle while holding the projector. Image 10-6 Pull the lamp box out of the projector slowly.

  • Page 100: Reset Of The Lamp Operation Time

    10. Lamp replacement Image 10-9 Note: You cannot turn on the projector without attaching the lamp cover. 12.Insert the side cover (c) into the projector and tighten two screws (a) on the rear and two screws (b) on the side of the side cover using a Phillips screwdriver.
  • Page 101 10. Lamp replacement Important • When the operation times of both lamps have exceeded 4000 hours , you can operate the projector only for 3 minutes after turning on the power. During this time, carry out steps 15 to 20 to reset the lamp operation times. •...
  • Page 102 10. Lamp replacement R5905597 PHXX SERIES 20/05/2014...

  • Page 103: Maintenance

    11. Maintenance 11. MAINTENANCE ARNING Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols when cleaning the projector body and lens. Flammable substances may ignite causing fire or breakdown while the lamp is illuminating. AUTION Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector.
  • Page 104 11. Maintenance FILTER MENU ENTER Image 11-1 3. Press the ENTER key. 4. Select CLEANUP PERIOD by pressing the ▲ or ▼key. CLEANUP PERIOD 1 WEEK Image 11-2 5. Select 24H or 1 WEEK by pressing the ◄ or ► key. The filter is cleaned about every 24 hours.

  • Page 105: How To Clean The Automatic Cleaning Filter

    11. Maintenance The value of each item is out of the setting range. 8 or over (1 WEEK only) 7D 01H or over 8. Select OK to accept the interval you entered and exit the menu, or select CANCEL to exit the menu without saving the setting. When you select OK or CANCEL, the CLEANUP PERIOD menu is displayed.
  • Page 106 11. Maintenance Image 11-7 4. Remove the dust box from the automatic cleaning filter and get rid of the dust from it. Suck dirt and dust from the automatic cleaning filter and projector using a vacuum cleaner. Image 11-8 5. Attach the dust box to the automatic cleaning filter. Image 11-9 6.

  • Page 107: Troubleshooting

    12. Troubleshooting 12. TROUBLESHOOTING Advise Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer. 12.1 No image appears on the screen Overview Problem Solution...

  • Page 108: Images Are Not Displayed Correctly

    12. Troubleshooting 12.2 Images are not displayed correctly Overview Problem Solution Projected images are shaking. • Check that the cable connected to the external device isn’t intermittent. Projected images are • Connect the cable’s plug with the external device’s connector firmly. displaced.

  • Page 109: Other Problems

    12. Troubleshooting Problem Solution Only the motion areas in the This is caused by the computer being used. Contact the manufacturer of your computer. images supplied from the computer aren’t displayed. Projected images are obscured. • Match the output resolution of your computer with the resolution of the projector. For the method to change the output resolution of the computer, contact the manufacturer of your computer.

  • Page 110: Led

    12. Troubleshooting Problem Solution The keys on the projector (except for the POWER key) • PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS don’t function. enable the password lock. → Cancel the password lock or contact the person in charge of management of the projec- tor.

  • Page 111: Specifications

    13. Specifications 13. SPECIFICATIONS 13.1 Specifications of PHXG-91B Overview Projector type XGA single-chip DLP projector Technology 0.70" DMD Color wheel 4S standard (RGBW) Resolution 1,024 x 768 XGA Brightness 8,500 ANSI lumens / 6,200 ANSI lumens (eco-mode) (complies with ISO 21118) Contrast ratio 2,800:1 Brightness uniformity...

  • Page 112: Specifications Of Phwx-81B

    13. Specifications 13.2 Specifications of PHWX-81B Overview Projector type WXGA single-chip DLP projector Technology 0.65" DMD Color wheel 4S standard (RGBW) Resolution 1,280 x 800 WXGA Brightness 7,300 ANSI lumens / 5,300 ANSI lumens (eco-mode) (compliant with ISO 21118) Contrast ratio 2,800:1 Brightness uniformity Aspect Ratio...

  • Page 113: Specifications Of Phwu-81B

    13. Specifications 13.3 Specifications of PHWU-81B Overview Projector type WUXGA single-chip DLP projector Technology 0.67" DMD Color wheel 4S standard (RGBW) Resolution 1,920 x 1,200 WUXGA Brightness 7,500 ANSI lumens / 5,450 ANSI lumens (eco-mode)(compliant with ISO 21118) Contrast ratio...

  • Page 114: Specification Of Rgb Signals In Each Computer Mode Of The Projector For Phwu-81B

    13. Specifications 13.4 Specification of RGB signals in each computer mode of the projector For PHWU-81B Overview Signal mode Resolution Horizon- Verti- Normal mode Native mode Plug and Play tal fre- cal fre- (H x V) (H x V) (H x V)

  • Page 115: Specification Of Rgb Signals In Each Computer Mode Of The Projector, For Phwx-81B

    13. Specifications WXGA60a 1280 x 800 49.70 59.81 1920 x 1200 1280 x 800 WXGA60b 1360 x 768 47.71 60.02 1920 x 1085 1360 x 768 1366 x 768 47.71 59.79 1920 x 1080 1366 x 768 WXGA60c WXGA+60 1440 x 900 55.94 59.89 1920 x 1200...
  • Page 116 13. Specifications 1080i60 1920 x 1080 33.75 60.00 1280 x 720 (1125i60) 1080i50 1920 x 1080 28.13 50.00 1280 x 720 (1125i50) 480p (525p) 720 x 480 31.47 59.94 1280 x 720 576p (625p) 720 x 576 31.25 50.00 1280 x 720 720p60 1280 x 720 45.00...

  • Page 117: Specification Of Rgb Signals In Each Computer Mode Of The Projector, For Phxg-91B

    13. Specifications MAC13 640 x 480 35.00 66.67 1066 x 800 640 x 480 MAC16 832 x 624 49.72 74.55 4 1066 x 800 832 x 62 1024 x 768 60.24 75.02 1066 x 800 1024 x 768 MAC19 HP75 1024 x 768 62.94 74.92...
  • Page 118 13. Specifications VGA75 640 x 480 37.50 75.00 1024 x 768 VGA85 640 x 480 43.27 85.01 1024 x 768 800 x 600 35.16 56.25 1024 x 768 SVGA56 SVGA60 800 x 600 37.88 60.32 1024 x 768 SVGA72 800 x 600 48.08 72.19 1024 x 768...

  • Page 119: Specification Of Rgb Signals In Each Computer Mode Of The Projector

    Some computers aren’t compatible with the projector. • The projector’s maximum resolution is 1920 x 1200 pixels (PHWU-81B), 1280 x 800 pixels (PHWX- 81B), or 1024 x 768 pixels (PHXG-91B). It may not display images of higher resolutions than its maximum resolution correctly.

  • Page 120: Dimensions

    13. Specifications 13.8 Dimensions Overview Holes for hanger (M4 Depth 10 : 4 places) Ø46.6 Image 13-1 * = factory defaults 13.9 Connectors SERIAL IN/OUT (D-SUB 9-pin) 5 1 Image 13-2 Pin No. Name COMPUTER/COMPONENT VIDEO IN-1 (Mini D-SUB 15-pin) Image 13-3 Pin No.
  • Page 121 13. Specifications Pin No. Spec B(BLUE)/PB/CB DDC 5V DDC Data HD/CS DDC Clock COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) (DVI-D 24-pin) Image 13-4 Pin No. Spec TMDS DATA 2- TMDS DATA 2+ TMDS DATA 2 Shield DDC Clock DDC Data TMDS DATA 1- TMDS DATA 1+ TMDS DATA 1 Shield +5V Power...
  • Page 122 13. Specifications HDMI IN (HDMI connector) 2 18 Image 13-5 Pin No. Spec TMDS DATA 2+ TMDS DATA 2 Shield TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 Shield TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 Shield TMDS DATA 0- TMDS Clock+ TMDS Clock Shield...

  • Page 123: Option Lens H Lens 0.8-1.0, 2.8-4.5 Or 4.5-8.7

    A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 A. OPTION LENS H LENS 0.8-1.0, 2.8-4.5 OR 4.5-8.7 AUTION Lens mounting must be performed by service personnel. A.1 Lens mounting procedure Preparation Check that the lens shift is at the factory default position (or the lens shift reset position) before mounting the option lens. Be sure to turn off the projector and unplug the power cord from the wall outlet before mounting the option lens.

  • Page 124: Focus Correction Function

    A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 ( f ) ( h ) Image A-3 Lens removal Lens caps Optional lens 5. While holding down the lock button (f), slightly turn the fixed ring (g) counterclockwise to release the lock. 6.

  • Page 125: Check After Mounting The Lens

    A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 A.3 Check after mounting the lens Overview After replacing the lens, be sure to check the following for ensuring safety. • Check that the connector for the zoom/focus motor is locked securely. •...
  • Page 126 A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 Fornt projection Front projection, ceiling mounted Maximum projection area Center of the lens XGA model with H LENS 0.8-1.0 The numbers are approximate and may be slightly different from the actual measurements. Screen size (4:3) Projector distance (L) Lens shift height...

  • Page 127: Specifications H Lens 2.8-4.5

    A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 A.6 Specifications H LENS 2.8-4.5 General F No. : F2.2-2.7 Focal distance : f=40.7-65.1 mm Zoom/focus : electrical drive Image A-6 Fornt projection Front projection, ceiling mounted Maximum projection area Center of the lens XGA model with H LENS 2.8-4.5 The numbers are approximate and may be slightly different from the actual measurements.

  • Page 128: Specifications H Lens 4.5-8.7

    A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 Screen size (16:10) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H) Shortest Longest Movement Movement Movement size (Wide) (Tele) distance (H1) distance (H2) distance (W1) 10.3 15.5 12.7...
  • Page 129 A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 Image A-7 Fornt projection Front projection, ceiling mounted Maximum projection area Center of the lens XGA model with H LENS 4.5-8.7 The numbers are approximate and may be slightly different from the actual measurements. Screen size (4:3) Projector distance (L) Lens shift height...
  • Page 130 A. Option lens H LENS 0.8-1.0, 2.8-4.5 or 4.5-8.7 WUXGA model with H LENS 4.5-8.7 The numbers are approximate and may be slightly different from the actual measurements. Screen size (16:10) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H)

  • Page 131: Optional Lens H Lens 1.3-1.8

    B. Optional lens H LENS 1.3-1.8 B. OPTIONAL LENS H LENS 1.3-1.8 AUTION Lens mounting must be performed by service personnel. B.1 Lens mounting procedure Preparation Be sure to turn off the projector and unplug the power cord from the wall outlet before mounting the option lens. When you have any inquiries, contact your dealer.

  • Page 132: Specifications H Lens 1.3-1.8

    B. Optional lens H LENS 1.3-1.8 Cautions after mounting • Do not transport the projector with the option lens mounted. The projector may be damaged. • With the option lens mounted, the brightness, resolution, and color uniformity in the projected image may differ from those with the standard lens.

  • Page 133: Specifications H Lens 2.2-2.7

    B. Optional lens H LENS 1.3-1.8 Screen size (4:3) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H) Shortest Longest Movement Movement Movement size (Wide) (Tele) distance (H1) distance (H2) distance (W1) WXGA model with H LENS 1.3-1.8 The numbers are approximate and may be slightly different from the actual measurements.
  • Page 134 B. Optional lens H LENS 1.3-1.8 Image B-3 XGA model with H LENS 2.2-2.7 The numbers are approximate and may be slightly different from the actual measurements. Screen size (4:3) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H) Shortest...
  • Page 135 B. Optional lens H LENS 1.3-1.8 WUXGA model with H LENS 1.3-1.8 The numbers are approximate and may be slightly different from the actual measurements. Screen size (16:10) Projector distance (L) Lens shift height Lens shift width Diagonal Width (W) Height (H) Shortest Longest...
  • Page 136 B. Optional lens H LENS 1.3-1.8 R5905597 PHXX SERIES 20/05/2014...

  • Page 137: Environmental Information

    For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee...
  • Page 138 C. Environmental information 部件名称 有毒有害物质或元素 铅 (Pb) 镉 (Cd) 多 溴 二 苯 醚 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) (PBDE) 实装基板 框架 光学单元 遥控器 电缆类 灯泡 备注（○或×的表示意思） ○:表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下。 ×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求。 1. 零部件名称的“框架”，包括外部框架及内部构件。 (3)根据包装回收标志(GB/T18455-2010) 废弃包装器材时，有关包装器材的回收、再利用等请遵守地方自治体的相关法律法规的要求。 电池包装膜 随包装物品袋 缓冲材料 外包装箱 / 隔板 随包装物品带(CD-ROM袋) 产品包装膜...
  • Page 139 Glossary GLOSSARY Default Gateway A server (or router) to communicate across networks (subnets) that are divided by Subnet Mask. DHCP Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Address to networked devices. IP Address Numerical address to identify networked computers. MAC Address Abbreviation for Media Access Control Address.
  • Page 140 Glossary R5905597 PHXX SERIES 20/05/2014...
  • Page 141 Index INDEX Remote control Blanking Accessories Brightness Adjustments 55–58, 60–64, 66–70, 72–73 Aspect ratio 58, 60 Detailed setting Auto power off Brightness Cleaning 99, 101 Color Filter 99, 101 Color enhancer Cleaning interval Color matrix How to Color temperature Lens Color tone Projector Color variations...
  • Page 142 Index Network settings 75–80 Clearing DHCP Image menu Control system Advanced menu Image position Default gateway Simple method How to use Image reverse Initialization Information menu IP address Advanced menu IP config Installation 14, 20 Save Batteries IP settings Remote control Start up Distorted image Network certification...
  • Page 143 UV radiation Setup Ceiling mount holes Screen Signal menu Video equipment Advanced menu Connection Specifications 107–111, 113, 115–116 Connectors PHWU-81B PHWX-81B Warnings PHXG-91B Mercury vapor warnings RGB signals 110–111, 113, 115 Ultraviolet radiation PHWU-81B UV radiation PHWX-81B R5905597 PHXX SERIES 20/05/2014...

This manual is also suitable for:

Phwx-81bPhxg-91bPh seriesPhxx series

Table of Contents