TP-Link JetStream T2700G-28TQ User Manual page 99

Network Diagram

Configuration Procedure

Configure switch A

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Configure switch B

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 11 and Port 13 as ACCESS, and configure the link type
of Port 12 as GENERAL.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 12 and Port 13, and
configure the egress rule of Port 12 as Untag.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 11 and Port 12, and
configure the egress rule of Port 12 as Untag.
Description
Required. On VLAN→802.1Q VLAN→Port Config page, configure the
the
link type of Port 4 and Port 5 as ACCESS, and configure the link type of
Port 3 as GENERAL.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Port 3 and Port 4, and configure
the egress rule of Port 3 as Untag.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Port 3 and Port 5, and configure
the egress rule of Port 3 as Untag.
87