TP-Link JetStream T2700G-28TQ User Manual page 29

Choose the menu System → System Info → System Time to load the following page.
The following entries are displayed on this screen:
Time Info

Current System Time:
Current Time Source:
Time Config

Manual:
Get Time from NTP
Server:
Synchronize with
PC'S Clock:
Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
Figure 4-5 System Time
Displays the current date and time of the switch.
Displays the current time source of the switch.
When this option is selected, you can set the date and time
manually.
When this option is selected, you can configure the time zone
and the IP Address for the NTP Server. The switch will get UTC
automatically if it has connected to an NTP Server.
Time Zone: Select your local time.

Primary/Secondary NTP Server: Enter the IP address for

the NTP Server.
Update Rate: Specify the rate fetching time from NTP

server.
When this option is selected, the administrator PC's clock is
utilized.
17