TP-Link JetStream T2700G-28TQ User Manual page 97

Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
The following entries are displayed on this screen:
Create Protocol Template

Protocol Name:
Frame Type:
Ether Type:
DSAP:
SSAP:
Protocol Template Table

Select:
ID
Protocol Name:
Protocol Type:
Note:
The Protocol Template bound to VLAN cannot be deleted.
Configuration Procedure:
Step Operation
1 Set the link type for port.
Figure 7-11 Create and View Protocol Template
Give a name for the Protocol Template.
Select a Frame Type for the Protocol Template.
Enter the Ethernet protocol type field in the protocol template.
Enter the DSAP field when selected LLC.
Enter the SSAP field when selected LLC.
Select the desired entry. It is multi-optional.
Displays the Protocol Template ID.
Displays the Protocol Name.
Displays the Protocol type.
Description
Required. On the VLAN→802.1Q VLAN→Port Config page,
set the link type for the port basing on its connected device.
85