Admin Status:
Interface Name:
Click Detail to display the following figure:
Detail Information
Interface ID:
IP Address Mode:
IP Address:
Interface Status:
Line Protocol
Status:
Admin Status:
Interface Name:
View and modify the Admin status. Choose 'Disable' to disable
the interface's Layer 3 capabilities.
View and modify the interface name.
Figure 10-3 Detail Information
Displays ID of the interface, including VLAN ID, loopback
interface and routed port.
Displays the IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
BOOTP: allocated through BOOTP.
Displays the IP address and subnet mask of the interface.
Displays the interface current working status, which is up when
Admin Status is enable, line protocol is up and IP address is set.
Displays the line protocol status, which is up if any up-link port is
connected to the interface.
Displays the Admin status. Choose 'Disable' to disable the
interface's Layer 3 capabilities.
Displays the name of the interface.
145