TP-Link JetStream T2700G-28TQ User Manual page 71

Choose the menu Switching→LAG→LACP Config to load the following page.
The following entries are displayed on this screen:
Global Config

System Priority:
LACP Config

UNIT:
Select:
Port:
Admin Key:
Port Priority:
Figure 6-11 LACP Config
Specify the system priority for the switch. The system priority and
MAC address constitute the system identification (ID). A lower system
priority value indicates a higher system priority. When exchanging
information between systems, the system with higher priority
determines which link aggregation a link belongs to, and the system
with lower priority adds the proper links to the link aggregation
according to the selection of its partner.
Select the unit ID of the desired member in the stack.
Select the desired port for LACP configuration. It is multi-optional.
Displays the port number.
Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
Specify a Port Priority for the port. This value determines the priority
of the port to be selected as the dynamic aggregation group
59