Tracert - TP-Link JetStream T2700G-28TQ User Manual

Choose the menu Maintenance→Network Diagnostics→Ping to load the following page.
The following entries are displayed on this screen:
Ping Config

Destination IP:
Ping Times:
Data Size:
Interval:
Ping Result

Here you can view the Ping result.

18.4.2 Tracert

Tracert test function is used to test the connectivity of the gateways during its journey from the
source to destination of the test data. When malfunctions occur to the network, you can locate
trouble spot of the network with this tracert test.
Figure18-9 Ping
Enter the IP address of the destination node for Ping test.
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
Enter the size of the sending data during Ping testing. The default
value is recommended.
Specify the interval to send ICMP request packets. The default value
is recommended.
385