Severity:
Status:
Sync-Periodic
18.2.3 Remote Log
Remote log feature enables the switch to send system logs to the Log Server. Log Server is to
centralize the system logs from various devices for the administrator to monitor and manage the
whole network.
Choose the menu Maintenance→Log→Remote Log to load the following page.
The following entries are displayed on this screen:
Log Host
Index:
Host IP:
UDP Port:
Severity:
Status:
Note:
The Log Server software is not provided. If necessary, please download it on the Internet.
Specify the severity level of the log information output to each
channel. Only the log with the same or smaller severity level
value will be output.
Enable/Disable the channel.
Specify how frequent the log information would be synchronized
to the log file.
Figure18-5 Log Host
Displays the index of the log host. The switch supports 4 log
hosts.
Configure the IP for the log host.
Displays the UDP port used for receiving/sending log
information. Here we use the standard port 514.
Specify the severity level of the log information sent to each log
host. Only the log with the same or smaller severity level value
will be sent to the corresponding log host.
Enable/Disable the log host.
381