TP-Link JetStream T2700G-28TQ User Manual page 58

Configuration Procedure

Configure switch A, B, C and D before physically connecting them:

Step Operation
1 Configure the
name.
2 Configure stack
mode.
3 Configure authentication
mode and authentication
password.
4 Configure unit number
Connect the switches:

Connect switch A, B, C and D as the network diagram shows, and then power the switches on to
establish a stack.
Description
stack Optional. On Stack Management→Stack Config page,
configure the stack name.
port Required. On Stack Management→Stack Config page,
configure the stack port status as "Enable".
Optional. On Stack Management→Stack Config page, select
the Stack Auth Mode and configure the Stack Auth Key.
Optional. On Stack Management→Stack Renumber page,
configure the unit number of switch A, B, C and D as 1, 2, 3
and 4 respectively.
46
Return to CONTENTS