TP-Link JetStream T2700G-28TQ User Manual page 17

Chapter
Chapter 12 QoS
Chapter 13 ACL
Chapter 14 Network Security
Chapter 15 SNMP
Chapter 16 LLDP
Introduction
This module is used to configure QoS function to provide different
quality of service for various network applications and
requirements. Here mainly introduces:
DiffServ: Configure priorities, port priority, 802.1P priority and

DSCP priority.
Bandwidth Control: Configure rate limit feature to control the

traffic rate on each port; configure storm control feature to filter
broadcast, multicast and UL frame in the network.
Voice VLAN: Configure voice VLAN to transmit voice data

stream within the specified VLAN so as to ensure the
transmission priority of voice data stream and voice quality.
This module is used to configure match rules and process policies
of packets to filter packets in order to control the access of the
illegal users to the network. Here mainly introduces:
Time-Range: Configure the effective time for ACL rules.

ACL Config: ACL rules.

Policy Config: Configure operation policies.

Policy Binding: Bind the policy to a port/VLAN to take its effect

on a specific port/VLAN.
This module is used to configure the multiple protection measures
for the network security. Here mainly introduces:
IP-MAC Binding: Bind the IP address, MAC address, VLAN ID

and the connected Port number of the Host together.
ARP Inspection: Configure ARP inspection feature to prevent

the network from ARP attacks.
IP Source Guard: Configure IP source guard feature to filter IP

packets in the LAN.
DoS Defend: Configure DoS defend feature to prevent DoS

attack.
802.1X: Configure common access control mechanism for

LAN ports to solve mainly authentication and security
problems.
This module is used to configure SNMP function to provide a
management frame to monitor and maintain the network devices.
Here mainly introduces:
SNMP Config: Configure global settings of SNMP function.

Notification: Configure

management station to monitor and process the events.
RMON: Configure RMON function to monitor network more

efficiently.
This module is used to configure LLDP function to provide
information for SNMP applications to simplify troubleshooting.
Here mainly introduces:
Basic Config: Configure the LLDP parameters of the device.

Device Info: View the LLDP information of the local device and

its neighbors
Device Statistics: View the LLDP statistics of the local device

5
notification function for the