TP-Link JetStream T2700G-28TQ User Manual page 381

The following entries are displayed on this screen:
Current Role

Role:
Cluster management-vlan

VLAN ID:
Role Change

Individual:
Commander:
For a commander switch, the following page is displayed.

The following entries are displayed on this screen:
Current Role

Role:
Role Change

Candidate:
Displays the role the current switch plays in the cluster.
Enter the cluster management-vlan id.
Select this option to change the role of the switch to be individual
switch.
Select this option to change the role of the switch to be
commander switch, and then configure the cluster:
Cluster Name: Configure the name of the current cluster the

switch belongs to.
IP Pool & Mask: Configure the private IP range of the member

switches in the cluster.
Figure17-14 Cluster Configuration for Commander Switch
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be candidate
switch.
369