TP-Link JetStream T2700G-28TQ User Manual page 285

Choose the menu QoS→DiffServ→DSCP Priority to load the following page.
The following entries are displayed on this screen:
DSCP Priority Config

DSCP Priority:
Priority Level

DSCP:
Priority:
Note:
To complete QoS function configuration, you have to go to the Schedule Mode page to select a
schedule mode after the configuration is finished on this page.
Configuration Procedure:
Step Operation
1 Configure
relation between the DSCP
priority and TC
2 Select a schedule mode
Figure 12-9 DSCP Priority
Select Enable or Disable DSCP Priority.
Indicates the priority determined by the DiffServ region of IP
datagram. It ranges from 0 to 63.
Indicates the priority the packets with tag are mapped to. The
priority are labeled as COS0, COS1, COS2...COS7.
Description
Required. On QoS→DiffServ→DSCP Priority page,
the mapping
enable DSCP Priority and configure the mapping
relation between the DSCP priority and TC.
Required.
page, select a schedule mode.
On QoS→DiffServ→Schedule
273
Mode