TP-Link JetStream T2700G-28TQ User Manual page 322

Choose the menu Network Security→ARP Inspection→ARP Detect to load the following page.
The following entries are displayed on this screen:
ARP Detect

ARP Detect:
Trusted Port

UNIT:
Trusted Port:
Configuration Procedure:
Step Operation
1 Bind the IP address, MAC
address, VLAN ID and the
connected Port number of
the Host together.
2 Enable the protection for the
bound entry.
3 Specify the trusted port.
Figure 14-14 ARP Detect
Enable/Disable the ARP Detect function, and click the Apply
button to apply.
Select the unit ID of the desired member in the stack.
Select the port for which the ARP Detect function is unnecessary
as the Trusted Port.
routing port and LAG port, should be set as Trusted Port. To
ensure the normal communication of the switch, please
configure the ARP Trusted Port before enabling the ARP Detect
function.
Description
Required. On the IP-MAC Binding page, bind the IP
address, MAC address, VLAN ID and the connected Port
number of the Host together via Manual Binding, ARP
Scanning or DHCP Snooping.
Required. On
Binding→Binding Table page, specify a protect type for
the corresponding bound entry.
Required. On
Inspection→ARP Detect page, specify the trusted port.
The specific ports, such as up-linked port, routing port
and LAG port, should be set as Trusted Port.
310
The specific ports, such as up-linked port,
Network
the
Network
the
Security→IP-MAC
Security→ARP