TP-Link JetStream T2700G-28TQ User Manual page 403

For example: Configure the IP address as 10.10.70.22, mask as 255.255.255.0 and
gateway as10.10.70.1. The detailed steps are shown as the figure below.
Figure 19-7 Configure the IP parameters of the switch
4) Configure the parameters of the FTP server which keeps the upgrade firmware, and
download the firmware to the switch from the FTP server. Store the downloaded firmware
in the switch with the name of image1.bin or image2.bin, and specify its attribute as
startup image or backup image.
Here take the following parameters of the FTP server as an example. IP address is
10.10.70.146; the user name for login to the FTP server is 2700 and the password is 123;
the name of the upgrade firmware is image.bin. Store the firmware as image1.bin in the
switch. The detailed steps are shown as the following figure.
Figure 19-8 Download the firmware from the FTP server
Specify the attribute of the downloaded image1.bin as startup image.
Figure 19-9 Specify the startup image
391