TP-Link JetStream T2700G-28TQ User Manual page 39

Choose the menu System→Access Security→Access Control to load the following page.
The following entries are displayed on this screen:
Access Control Config

Control Mode:
IP Address& Mask：
MAC Address:
Port:
Session Config

Session Timeout:
Access User Number

Number Control:
Figure 4-17 Access Control
Select the control mode for users to log on to the Web
management page.
IP-based: Select this option to limit the IP-range of the users

for login.
MAC-based: Select this option to limit the MAC Address of

the users for login.
Port-based: Select this option to limit the ports for login.

These fields can be available for configuration only when
IP-based mode is selected. Only the users within the IP-range
you set here are allowed for login.
The field can be available for configuration only when MAC-based
mode is selected. Only the user with this MAC Address you set
here is allowed for login.
The field can be available for configuration only when Port-based
mode is selected. Only the users connected to these ports you
set here are allowed for login.
If you do nothing with the Web management page within the
timeout time, the system will log out automatically. If you want to
reconfigure, please login again.
Select Enable/Disable the Number Control function.
27