TP-Link JetStream T2700G-28TQ User Manual page 156

Admin Status:
Interface Name:
Interface List

Select :
ID:
Mode:
IP Address:
Subnet Mask:
Interface Name:
Status:
Operation:
Click Edit to display the following figure:
Modify Interface

Interface ID:
Mode:
IP Address:
Subnet Mask:
Specify interface administrator status. Choose 'Disable' to
disable the interface's Layer 3 capabilities.
Specify the name of the network interface.
Select the interfaces to modify or delete.
Displays the ID of the interface.
Display IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
BOOTP: allocated through BOOTP.
Displays the IP address of the interface.
Displays the subnet mask of the interface.
Displays the name of the interface.
Displays interface current working status. Working status is up
when admin status is enable, line protocol is up and IP Address is
set.
You can configure the interface by clicking the "Edit", or check
Detail information by clicking "Detail".
Figure 10-2 Interface Modify
Displays ID of the interface, including VLAN ID, loopback
interface and routed port.
View and modify the IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
BOOTP: allocated through BOOTP.
View and modify the IP address of the interface.
View and modify the subnet mask of the interface.
144