TP-Link JetStream T2700G-28TQ User Manual page 103

The following entries are displayed on this screen:
Global Config

VLAN Mapping:
VLAN Mapping Config

Port:
C VLAN:
SP VLAN:
Name:
VLAN Mapping List

Select:
Operation:
Click Edit to display the following figure:
Modify the SP VLAN and name of the selected entry and click Edit to apply.
Note:
When VPN mode is globally enabled, VPN function takes effect on all ports. If VPN mode is
disabled, VLAN Mapping function can be enabled by selecting your desired port on this Port
Enable page.
Enable/Disable the VLAN mapping function. Enable/Disable the
VLAN mapping function. If VLAN mapping is disabled and VLAN
VPN is enabled, the packet will be encapsulated with an outer tag
according to the PVID of its arriving port.
Select/Input the port number.
Enter the ID number of the Customer VLAN. C VLAN refers to the
VLAN to which the packet received by switch belongs.
Enter the ID number of the Service Provider VLAN.
Give a name to the VLAN Mapping entry or leave it blank.
Select the desired entry to delete the corresponding VLAN
Mapping entry. It is multi-optional.
Click the Edit button to modify the settings of the entry.
Figure 7-15 VLAN Mapping Entry Config
91