TP-Link JetStream T2700G-28TQ User Manual page 195

network connectivity at all time. The non-backbone Area 1 and Area 2 cannot communicate
directly with each other, but they can exchange routing information through the backbone Area 0.
On large-scale networks, an appropriate area partition can help greatly to save network resources
and enhance the speed of the routing.
After the area partition in the network, routers of different type need to accomplish different tasks.
Different areas need to transmit the routing information to the backbone area in different ways,
due to their different locations relative to the backbone area. In the following, we will introduce the
details involved after the area partition.
1. Router Type
As Figure 10-35 shows, after the area partition of the network, the routers need to accomplish
different tasks due to their locations in different areas, according to which the routers can be
classified into 4 types: Internal Router (IR), Backbone Router (BR), Area Boundary Router (ABR)
and Autonomous System Boundary Router (ASBR).
Responsibilities of different routers divide as Table 10-2.
Router Features
Name
IR All the
interfaces belong to
the same area
BR At least one routing
interface belongs to
the backbone area
ABR Connect
more areas to the
backbone area
ASBR Connect
routers outside the
OSPF AS by other
routing protocol
2. Virtual Link
In practice, some physical restrictions might keep ABR of some areas from directly connecting to
the backbone area, which can be solved by configuring an OSPF virtual link. Virtual link sketch is
shown as below.
Figure 10-35 Classification of Routers
Responsibility
routing Flood and exchange its all link and interface information with
the adjacent routers in the same area, thus to synchronize
the link state database with the intra-area routers.
Summarize the routing topology information from all areas in
AS via ABR and forward the communication data for all
areas.
one or Maintain independent link state databases for different
areas, and deliver the topology information of each area to
the other areas via the backbone area.
with the Maintain independent routing tables for different routing
protocols, import the routing information learned by other
routing protocol to OSPF domain through a certain standard,
and then establish a uniform routing table.
Table 10-2 Router Types
183