5
Installation of the boiler
B Hook side connection plate with the "U" into the
cut-out on each of the front and back connection
plates. Each connecting plate is secured in the front
hole and the rear slot using 2 self-tapping screws.
5.11 Fitting the side panels
The cutout in the flange of each side panel
section must be in the centre of the boiler.
B Insert side panels with the flange behind the boiler
frame at the bottom and in the slot in the centre.
20
Logano plus SB615 Gas - We reserve the right to make any changes due to technical modifications.
Fig. 11 Inserting and securing the lateral connection
plates
Fig. 12 Inserting side panels
6720615883-30.1RS