5.18 Fitting the front panel
B Push the tabs on the lower connection plate from
below into the slots to the left and right on the side
panels and secure the connection plate with two
machine screws on the front of the boiler body.
B Hook the lower front panel section with the four hooks
[1] into the slots to the left and right on the side panels.
B Insert the upper front panel section with its hooks [2]
into the slots on the lower front panel, and hook the top
into the front boiler cover [3].
Logano plus SB615 Gas - We reserve the right to make any changes due to technical modifications.
Installation of the boiler
Fig. 23 Securing the lower connection plate
Fig. 24 Fasten lower and upper front panels
1
Hook lower front panel
2
Hook upper front panel
3
Hooking the upper front panel into the boiler cover
5
27