CYBEX Arc Trainer 425A Service Manual page 56

Left Input Handle
BHSCS/
Loctite
Washer
Heart Rate
Cables
Figure 3
D. Slide the pivot shaft through main frame
opening to remove input handles. See
Figure 3.
E. Set input handles aside. They will be
reattached later.
6. Remove the front cover.
A. Using a Phillips screwdriver, remove the four
screws securing the front cover. See Figure 4.
Front
Cover
Screws
(4)
Figure 4
B. Remove front cover.
7. Remove top cover.
A. Using a Phillips screwdriver, remove the
screw securing the top cover. See Figure 5.
Figure 5
Right Input Handle
Opening
Pivot Shaft
Washer
Grease
BHSCS/
Loctite
Loctite
Top Cover
Screw
B. Remove top cover.
8. Remove upper side covers.
A. Using a Phillips screwdriver, remove the
screw securing each of the upper side covers.
See Figure 6.
Locking
Connectors
Upper Left
Side Cover
Figure 6
B. Remove upper side covers.
9. Remove lower side covers.
A. Using a Phillips screwdriver, remove the four
screws securing each of the lower side covers.
See Figure 7.
Lower Left
Side Cover
Figure 7
B. Remove both lower side covers.
Screw
Screws
(4)