CYBEX Arc Trainer 425A Service Manual page 48

Locking
Connectors
Upper Left
Side Cover
Figure 4
B. Remove upper side cover.
7. Attach the new upper side cover.
A. Place the new upper side cover (A) or (B) in
position. See Figure 4.
B. Using a Phillips screwdriver, tighten the
screw securing the new upper side cover.
8. Attach the top cover.
A. Place the top cover in position. See Figure 3.
B. Using a Phillips screwdriver, tighten the
screw securing the top cover.
9. Attach the front cover.
A. Place the front cover in position. See Figure 2.
B. Using a Phillips screwdriver, tighten the
four screws securing the front cover.
10. Test unit for proper operation.
Cybex ® and the Cybex logo are registered trademarks of Cybex International, Inc.
Arc Trainer ® and its mark are registered trademarks of Cybex International, Inc.
10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 • www.cybexinternational.com • techhelp@cybexintl.com
techpubs@cybexintl.com • Copyright © 2008, Cybex International, Inc. All rights reserved • 425A-508 A • March 2008
Screw