Silent Mode; Auto Drum Refresh Setting - Kyocera TASKalfa 181 Operation Manual

Silent Mode

This mode reduces operating noise of this machine. Use this mode if the operating noise of this
machine is annoying.
1 Display the Machine default screen. (See
page 3-12.)
2 Press the key or the
3
Press the Enter key.
4 Press the key or the
5 Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.

Auto Drum Refresh Setting

If the machine is used under the high humidity environment, there might be the possibility to get
horizontal line on the half tone section which is printed. In this case, please follow the following
procedure to set for performing drum refresh automatically. Once auto drum refresh is set On, the
drum refresh will be performed when turning on the main power switch or Power key.
Note
This setting is displayed only on the 25 ppm model.
1 Display the Machine default screen. (See
page 3-12.)
2
Press the key or the
Refresh.
3 Press the Enter key.
4 Press the key or the
5
Press the Enter key.
6 Press the Reset key.
How to Display the Machine Default Screen
key to select Silent Mode.
key to select On or Off.
How to Display the Machine Default Screen
key to select Auto Drum
key to select On.
Machine Default :
Auto Sleep
Auto Clear
Silent Mode
Silent Mode :
Off
On
*
Machine Default :
Auto Clear Time
Silent Mode
Auto DrumRefresh
Auto Drum Refresh :
Off
*
On
System Menu
on
: On
: Off
: On
on
: 90 Sec.
: On
: Off
3-25