Job Name; Lf Action; Cr Action - Kyocera 5550ci Operation Manual

LF Action

Set the line feed action when the machine receives the line feed code (character code 0AH).
The table below shows the available settings.
Item
LF Only
LF and CR
Ignore LF
Use the procedure below to specify an LF action.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [LF Only], [LF and CR] or [Ignore LF].
4
Press [OK].

CR Action

Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings.
Item
CR Only
LF and CR
Ignore CR
Use the procedure below to specify a CR action.
1
Press the System Menu key.
2
Press [Printer], [
3
Press [CR Only], [LF and CR] or [Ignore CR].
4
Press [OK].

Job Name

Set whether the job name set in the printer driver is displayed.
Use the procedure below to set the Job Name.
1
Press the System Menu key.
2
Press [Printer], [
3
Select [Off] or [On].
4
Press [OK].
Only line feed performed.
Line feed and character return performed.
No line feed performed.
] and [Change] of LF Action.
Only character return performed.
Character return and line feed performed.
No character return performed.
] and [Change] of CR Action.
] and [Change] of Job Name.
Description
Description
9-60
Default Setting (System Menu)