Mobile Extension - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 3000 or higher system software, the Desktop terminal and the Mobile Extension can
both ring. If neither extension answers, the call can forward to Voice Mail.
With Version 3000 or higher system software, the Calling Party Number (CPN) can be delivered to
the Mobile Extension user.
Must be coordinated with local Telco.

With Version 3000 or higher system software, the Mobile Extension feature supports analog trunks.
With Version 5000 or higher system software, callback to cell phone has been added.
With Version 9000 or higher system software, a Progress Tone is played to the caller until the call to
the Mobile Extension number is set up.
With Version 9000 or higher system software, any DID can be set up to provide an internal dial tone
when Mobile Extension users call in.
Description
A mobile extension is an external telephone (preferably a mobile phone) linked to the UNIVERGE
SV8100 via a Proxy Port to operate as an internal single line telephone extension. The extension sends
DTMF signals to the system allowing access to the system features. A registered Mobile Extension uses
one analog port (ports are reserved in groups of two), however, no PCB support (analog or digital) is
required. The Mobile Extension port must be an unequipped extension port on the UNIVERGE SV8100
system - no physical telephone is required on the SV8100 system.
 A mobile extension cannot be used as a voice mail port.

Mobile Extension

Mobile Extension
Issue 13.0
2 - 1109