Kyocera TASKalfa 3501i Operation Manual page 80

Installing and Setting up the Machine > Default Settings of the Machine
2
2
Select "Network" and then "TCP/IP Setting".
System/Network
1
Next
Network: Optional Network:
Security Level:
Network Interface (Send): Change
Interface Block Setting: Data Security:
Next
Document Guard: Optional Function:
Change
Restart Entire Device:
Start
Configure the settings.
System/Network - TCP/IP Setting
TCP/IP: Change IPv4:
Bonjour:
IPv6:
Next
IPSec:
Change
When using DHCP server
[DHCP]: Set to [On].
When setting the static IP address
[DHCP]: Set to [Off].
[IP Address]: Enter the address.
[Subnet Mask]: Enter the address.
[Default Gateway]: Enter the address.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Network (page 8-46)
System/Network - Network
Next
Host Name:
Change Protocol Settings:
LAN Interface:
Next
Next
Close
System/Network - IPv4
Change
Change
1
Close
2-26
TCP/IP Setting:
Security Settings:
Change
Restart Network:
Change
Set TCP/IP (IPv4).
* The setting will be changed after restarting the device or network.
2
IP Address
0.0.0.0
3
Subnet Mask
0.0.0.0
On
4
Default
0.0.0.0
Gateway
Off On
DHCP Auto-IP
Cancel
2
Next
Next
Start
Close
5
OK