Loading Originals In The Document Processor - Kyocera TASKalfa 3501i Operation Manual

Hide thumbs Also See for TASKalfa 3501i:
Table of Contents

Advertisement

Operation on the Machine > Loading Originals

Loading Originals in the Document Processor

The optional document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals
are scanned.
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Detail
Weight
Sizes
No. of sheets
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals.
Soft originals such as vinyl sheets
Transparencies such as OHP film
Carbon paper
Originals with very slippery surfaces
Originals with adhesive tape or glue
Wet originals
Originals with correction fluid which is not dried
Irregularly shaped (non-rectangular) originals
Originals with cut-out sections
Crumpled paper
Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.)
Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before
loading. Failure to do so may cause the originals to jam.)
How to Load Originals
IMPORTANT
• Before loading originals, be sure that there are no originals left on the original eject table. Originals left on
the original eject table may cause the new originals to jam.
• Do not make an impact on the document processor top cover, such as aligning the originals on the top
cover. It may cause an error in the document processor.
Document Processor
(Automatic 2-Sided)
2
45 to 160 g/m
(duplex: 50 to120 g/m
Maximum A3 to Minimum A5-R
Maximum Ledger to Minimum Statement-R
2
Plain paper (80 g/m
), Colored paper, Recycled
paper, High Quality:
100 sheets (Mixed size originals: 30 sheets)
2
Thick paper (157 g/m
): 50 sheets
2
Thick paper (120 g/m
): 66 sheets
Art paper:
1 sheet
Document Processor (Dual scan DP)
2
)
35 to 220 g/m
Sizes smaller than B6-R are 50 to 105 g/m
(one-side/duplex)
Maximum A3 to Minimum A6-R
Maximum Ledger to Minimum Statement-R
Plain paper (80 g/m
paper, High Quality:
175 sheets (Mixed size originals: 30 sheets)
Thick paper (157 g/m
Thick paper (120 g/m
Art paper:
5-3
2
2
(duplex: 50 to 220 g/m
)
2
), Colored paper, Recycled
2
): 89 sheets
2
): 116 sheets
1 sheet
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 4501iTaskalfa 5501i

Table of Contents