Kyocera TASKalfa 3501i Operation Manual page 390

Setup and Registration (System Menu) > System Menu
Item
Sleep Level (models except for
Europe)
Sleep Rules
EnergySaver RecoveryLevel
Weekly Timer Settings
Weekly Timer
Schedule
Retry Times
Retry Interval
*1 Displayed only when the optional fax kit is installed.
*2 This is displayed when the optional Card Authentication Kit is installed.
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit is installed.
Select whether to use the Energy Saver mode for the following functions individually:
• Network
• USB Cable
2
• Card Reader*
1
• FAX*
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not wake from sleep mode
when it receives print data from a PC connected by USB cable. Also, the ID card cannot be recognized.
Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately.
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling the use of
desired functions only.
If you want to use all functions immediately, press the [
to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only. This
Configure settings for switching the machine into Sleep mode and waking it automatically at a
specified time for each day of the week.
Select whether to use Weekly Timer.
Value: Off, On
Specify the time for each day of the week at which the machine enters Sleep mode and
recovers.
Set the number of retry to switch the machine into Sleep mode.
Value: Limited Retries, Unlimited Retries
NOTE
If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10. Retry is not
performed when "0" is set.
If [Unlimited Retries] is selected, retry is performed until the machine enters Sleep mode.
Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
8-56
Description
mode saves energy most effectively.
Power
] key