Priority Override; Repeat Copy - Kyocera TASKalfa 3501i Operation Manual

Using Various Functions > Functions

Priority Override

Advanced
Copy
Setup
Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished.
(Value: [Off] / [On])
NOTE
This function is not available if current job was an override.
Priority override may not be available depending on the status of the current print job and memory usage. In this case,
try the interrupt copy.
Interrupt Copy (page 5-22)

Repeat Copy

Advanced
Copy
Setup
Enables additional copies in the desired quantity as necessary after a copy job is completed. For confidential
documents, you can set up a password for the use of Repeat Copy. In such a case, the correct password must be
entered to perform Repeat Copy.
To register a password, press [# Keys] and enter a 4-digit password.
IMPORTANT
• A Repeat Copy job is cleared when the main power switch is turned off.
• If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the password
beforehand if necessary.
Repeat Copy is not available when the machine is equipped with the optional Data Security Kit.
When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be
used. (Refer to Repeat Copy Job Retention on page
You can select Repeat Copy as the default setting. For details, refer to
Giving a file name to a copy job will facilitate identification of the data when copying. (Refer to
6-54.)

Repeat Copy

The Repeat Copy jobs are stored in the Job Box. Refer to
Repeat Copy jobs.
Functions
Custom
Memory
Box
USB Functions
8-34.)
Repeat Copy on page 8-20
Outputting Repeat Copy Jobs on page 5-64
6-55
.
File Name Entry on page
to print out the