Paper Output; Density - Kyocera TASKalfa 3501i Operation Manual

Using Various Functions > Functions

Paper Output

Org./Paper/
Copy
Finishing
Set paper output to document finisher or job separator tray.
Item
*
Inner Tray
Finisher Left Tray, Finisher Top Tray
Tray A, Tray B, Tray C
Right Tray
Job Separator*
Tray 1 to 7
* This cannot be selected when the optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
NOTE
• The setting for this function can be configured only when the optional job separator and/or document finisher
(1,000-sheet finisher or 4,000-sheet finisher) are installed.
• The default setting for Paper Output can be changed. For details, refer to
• When [Heavy 3] (164 g/m
the output destination is automatically changed to a tray that can be used.

Density

Image Quality
Copy
Adjust density using 7 or 13 levels.
Adjust density pressing [-3] (Lighter) to [+3] (Darker). You can change the density level
[-3] (Lighter) to [+3] (Darker) in half-steps.
Functions
Custom
Memory
Box
Inner tray of the machine (where copies are stored)
Tray of the optional 1,000-sheet finisher
Trays A to C in the optional 4,000-sheet finisher
Optional right job separator
Optional inner job separator
Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
2
-) or higher is set in Paper Weight and Mailbox (Option) is set for the output destination,
Color/
Custom
Send
Image Quality
USB Functions
Description
Functions Image Quality
Box
6-22
Paper Output on page 8-16.
USB Functions
Memory