Kyocera TASKalfa 3501i Operation Manual page 291

Using Various Functions > Functions
Item
Off
-1-, P.1, 1/n Position
1st Page
Start #
Last Page
Font Size
Style
Font
Color
Density
Display
Pattern
Denominator#*
Original Orientation
* This item appears when [1/n] is selected.
Value
Top Left, Top Middle,
Top Right, Bottom Left,
Bottom Middle,
Bottom Right, Detail
1 to 10
1 to 999
-10 to 0
Font sizes registered in
Text (Text Stamp) on page
8-20 are displayed.
None, Bold, Italic,
Bold/Italic
Courier, Letter Gothic
Black, White
10 to 100%
(in 10% increments)
Transparent, Clipping,
Overwrite
Auto, Manual (1 to 999)
Top Edge on Top,
Top Edge on Left
6-45
Description
Select the print position of page number.
Press [Detail] to set the page number position using numeric
values, and to set the page number position ([Same as Front
Page], [Mirror Front Page]) when a page number is placed on
the back side of the paper in duplex printing.
To start page numbering from a page other than the first page,
press [+] or [-] in "1st Page" to specify the starting page. Press
[# Keys] to use the numeric keys for entry.
To start the numbering with a number other than 1, press [+] or
[-] in "Start Number" to specify the starting number. Press [#
Keys] to use the numeric keys for entry.
If you do not want page numbering through to the last page,
press [Last Page]. Select [Manual] and use [+] or [-] to specify
the final page to be numbered (a negative number of pages
counting backwards from the last page), and then press [OK].
Specify the desired number up to -10. Press [# Keys] to use
the numeric keys for entry.
Set the font size of page number.
Set the font style of page number.
Set the font of page number.
Set the color of page number.
Set the density of the color of page number.
Set the value by pressing [+] or [-].
Set the display method of page number.
The total number of pages "n" in the format [1/n] can be
changed manually. Press [Denominator #] and select [Manual].
Press [+] or [-] to enter the total number of pages and press
[OK]. Press [# Keys] to use the numeric keys for entry.
Select the orientation of the original document top edge to
scan correct direction. Press [Original Orientation] to choose
orientation of the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].