Kyocera TASKalfa 3501i Operation Manual page 149

Preparation before Use > Registering Destinations in the Address Book
2
Check if the destination entry is correct and press [Save]. The destination is added to the
Address Book.
To register the registered address in a one-touch key, press [Yes] in the pop-up screen that appears
after [Save] is pressed.
NOTE
To register a new One Touch Key, refer to
Touch Key) on page 3-53.
The Folder (FTP) Address
Press [Change] of "Host Name", "Path", "Login User Name" and "Login Password", enter the
information for each item and press [OK].
The table below explains the items to be entered.
Item
Host name or IP address of FTP server
Host Name*
Path for the file to be stored
Path
For example, "User\ScanData".
If no path is entered, the file is stored in the home
directory.
FTP server login user name
Login User Name
FTP server login password
Login Password
* If you specify a port number other than the default (21), use the "Host name: port number"
(Example: FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE
• Refer to the Character Entry Method on page 11-10
• Press [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.
Adding a Destination on One Touch Key (One
Descriptions
for details on entering characters.
3-49
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters