Kyocera TASKalfa 3501i Operation Manual page 461

Troubleshooting > Troubleshooting
Message
Cannot offset this
*
paper.
Cannot perform print
from remote.
Cannot print the
specified number of
*
copies.
Cannot process this
*
job.
Cannot punch at the
specified position.
Cannot punch this
paper.
Cannot staple at the
specified position.
Cannot staple this
*
paper.
Cannot use ##### due to
a failure.
Check the document
processor.
Check the main unit
right tray.
Check the paper in the
multi purpose tray.
Check the side feeder.
Checkpoints
Did you select a paper size/type
that cannot be offset?
—
—
―
―
Have you selected a position that
cannot be punched?
Did you select a paper size/type
that cannot be punched?
Have you selected a position that
cannot be stapled?
Did you select a paper size/type
that cannot be stapled?
―
Is the top cover of the document
processor open?
Is the document processor open?
Is the main unit right tray closed?
Is the acceptable storage capacity
exceeded?
—
—
10-25
Corrective Actions
If the selected paper is not changed
and [Continue] is pressed, offset is
released.
Select the available paper. Press
[Continue] to print.
Remote printing is prohibited.
The job is canceled. Press [End].
Only one copy is available. Press
[Continue] to continue printing.
Press [Cancel] to cancel the job.
Restricted by Authorization settings.
The job is canceled. Press [End].
Restricted by Job Accounting. The
job is canceled. Press [End].
If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, punch is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
If the selected paper is not changed
and [Continue] is pressed, staple is
released.
Select the available paper. Press
[Continue] to print.
Call service.
Close the document processor
cover.
Close the document processor.
Open the main unit right tray.
Remove the paper. Printing then
resumes.
The paper size is different. Set
selected size paper and press
[Continue].
The side feeder is not installed
correctly. Attach the side feeder.
Reference
Page
page 6-18
page 8-27
—
―
page 9-29
page 6-20
page 6-20
page 6-19
page 6-19
―
―
―
—
—
page 3-33
—