Kyocera TASKalfa 3501i Operation Manual page 346

Setup and Registration (System Menu) > System Menu
Item
Paper Source for Cover
Special Paper Action
* If you want to enable the changed defaults immediately, move to the function screen and press the [Reset] key.
Select the paper source in which the cover paper used for the Cover function is placed.*
Value: Cassette 1 to 5, Multi Purpose Tray
NOTE
[Cassette 3] to [Cassette 5] are displayed when the following options are installed.
[Cassette 3]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1,500-
sheet x 2) is installed
[Cassette 4]: When a paper feeder (500-sheet x 2) or large capacity paper feeder (1,500-
sheet x 2) is installed
[Cassette 5]: When a side feeder (3,000-sheet) is installed
When printing on Prepunched, Preprint, and Letterhead, punch-holes might not be aligned or
the print direction might be upside-down depending on how originals are set and the
combination of copying functions. In such a case, select [Adjust Print Direction] to adjust the
print direction. When paper orientation is not important, select [Speed Priority].
If [Adjust Print Direction] is selected, load paper according to the steps below.
Example: copying on Letterhead
Original Paper
Original Paper
Value: Adjust Print Direction, Speed Priority
8-12
Description
Finishing Cassette
Finishing Cassette
MP Tray
MP Tray