Function Defaults - Kyocera TASKalfa 3501i Operation Manual

Hide thumbs Also See for TASKalfa 3501i:
Table of Contents

Advertisement

Setup and Registration (System Menu) > System Menu

Function Defaults

Common Settings
If you want to enable the changed defaults immediately, move to the function screen and press the [Reset] key.
Item
Original Orientation
Original Image (Copy)
Org. Image (Send/Store)
Scan Resolution
*
FAX TX Resolution
Color Selection
File Format
File Separation
Backgrnd Density (Copy)
BackgrndDens.(Send/Store)
Prevent Bleed-thru (Copy)
Prevent Bleed(Send/Store)
Zoom
Border Erase Default
Border Erase to Back Page
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left
Set the default original document type for copying.
Value: Text+Photo (Printer), Text+Photo (Magazine), Photo (Printer), Photo (Magazine),
Photo (Photo Paper), Text, Text (Fine Line), Graphic/Map (Printer), Graphic/Map
(Magazine)
Set the default original document type for sending/storing.
Value: Text + Photo, Photo, Text, Text (for OCR)
Select the default scanning resolution.
Value: 600×600dpi, 400×400dpi Ultra Fine, 300×300dpi, 200×400dpi Super Fine,
200×200dpi Fine, 200×100dpi Normal
For details, refer to the FAX Operation Guide.
Select the default color mode for scanning documents.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
Set the default type of the files.
Value: PDF, TIFF, JPEG, XPS, High Comp. PDF
Select the default file separation setting.
Value: Off, Each Page
Set the default Backgrnd Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Set the default Backgrnd Density (Send/Store).
Value: Off, Auto, Manual (Darker 5)
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Set the default Prevent Bleed (Send/Store).
Value: Off, On
Select the enlarged/reduced default when paper size/sending size changed after the originals
set.
Value: 100%, Auto
Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify border
erase widths in the middle of original, set the value in "Gutter".
Select the Border Erase Method for Back Page of a sheet.
Value: Same as Front Page, Do Not Erase
8-17
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 4501iTaskalfa 5501i

Table of Contents