Kyocera TASKalfa 3501i Operation Manual page 466

Hide thumbs Also See for TASKalfa 3501i:
Table of Contents

Advertisement

Troubleshooting > Troubleshooting
Message
Removable Memory is
*
full.
Remove originals in the
document processor.
Replace all originals and
press [Continue].
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
S
Message
Scanner memory is full.
*
Send Error.
Skewed originals fed.
Staple is empty. (Manual
Staple)
Staple is empty.
Staple jam.
System error.
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Are there any originals left in the
document processor?
Checkpoints
*
Has staple cartridge holder A run
out of staples?
*
Has staple cartridge holder run out
of staples?
Corrective Actions
The job is canceled. Press [End].
Insufficient free space in the
removable memory. Delete
unneeded files.
Remove originals from the
document processor.
Remove originals from the
document processor, put them back
in their original order, and place
them again. Press [Continue] to
resume printing. Press [Cancel] to
cancel the job.
Corrective Actions
Scanning cannot be performed due
to insufficient memory of the
scanner. Follow the instructions on
the screen.
An error has occurred during
transmission. The job is canceled.
Press [End].Refer to Responding to
Send Error for the error code and
corrective actions.
See the caution attached on the
document processor and check the
originals. If the originals are
jammed, follow the instructions on
the screen to remove the originals.
Add staples to staple cartridge
holder A.
If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the screen. Leave the machine on
and follow the instructions to
replace the staple case. Press
[Continue] to print without stapling.
Press [Cancel] to cancel the job.
If a staple jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instructions to remove the
jammed staple.
System error has occurred. Follow
the instructions on the screen.
10-30
Reference
Page
Reference
Page
page 10-33
page 10-13
page 10-12
page 10-63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Taskalfa 4501iTaskalfa 5501i

Table of Contents