Kyocera TASKalfa 3501i Operation Manual page 212

Operation on the Machine > Sending
3
4
5
6
7
Press [WSD Scan/DSM Scan].
If WSD Scan on page 8-45
step 5.
Select [DSM Scan] and press [Next].
Select the scan process to be used and press [OK].
DSM Scan - Selecting Scan Process
Select the scan process and press [OK].
Scan Process Name
ScanProcess001
ScanProcess002
ScanProcess003
ScanProcess004
ScanProcess005
Cancel
Press [Reload] to reload the computer list.
To check the settings, press [Detail].
Change the settings and add destinations as needed.
Only E-mail addresses can be added as destinations.
In the send base screen, press [Detail/Edit], [Destination], and then [Address Book] or [E-mail
Addr Entry], and add a destination.
In some scan processes, it may not be possible to change settings or add destinations.
Press the [Start] key.
Sending starts.
is set to [Off] in the network settings, press [DSM Scan] and go to
Reload
1/1
Detail
Back OK
5-40