Epson AcuLaser C9200N Service Manual page 189

EPSON AcuLaser C9200N
[5]
[6]
2. Remove the Flat Cable [4] and the Connector [5] of the PH Unit (Black).
3. Remove the Claw [6] and remove the Gear [7] of the PH Unit (Black).
DISASSEMBLY AND ASSEMBLY
[4]
4038F2C107DA
[7]
4038F2C108DB
Main Unit Disassembly/Reassembly
[8]
When removing the Stopper, use care so that both ends of the Stopper will not open
but stay parallel as shown in the figure above. Keep using the Stopper after once
stretched out may cause uneven pitch or other image troubles.
4. Remove the Stopper [8] of the PH Unit (Black).
Revision D
4038F2C109DA
189
Confidential