Error Message And Troubleshooting - Epson AcuLaser C9200N Service Manual

A3 color laser printer
Hide thumbs Also See for AcuLaser C9200N:
Table of Contents

Advertisement

EPSON AcuLaser C9200N

1.2.1 Error Message and Troubleshooting

Table 1-7. Error Message and Troubleshooting
Message
Explanation
A CompactFlash which does not
have two partitions has been
installed.
An unformatted CompactFlash
Format Required
has been installed.
No=LeftSW
The printer is turned on after
Yes=OK SW
executing "Format
CompactFlash" or "Delete All
CompactFlash Data" of the
Support Menu.
Paper Jam
Paper jam in the displayed area.
W W W W W
Transparency is specified, but
media other than transparencies
Check Transparency
were fed. Or transparency is not
specified, but transparencies was
fed.
The toner cartridge of the
NonGenuineToner uuuu
specified color is non-genuine.
Toner Cartridge Error
The toner cartridge of the
uuuu
specified color is out of order.
PRODUCT DESCRIPTION
l
Remedy
Press the OK button to
format the CompactFlash.
Turn off the printer without
any operation and remove
the CompactFlash.
Remove the jammed paper and
close the cover. Printing will be
started again from where the jam
occurred. Refer to
Figure
1-8.
Remove the media from the MP
Tray. Open and close cover F.
Load the correct media to start
printing again from where the
jam occurred.
The error is cleared either by
replacing it with a genuine toner
or selecting continuing use
according to the user
confirmation flow.
1. Replace the toner cartridge of
the specified color with a
normal one.
2. Replace with a new toner
cartridge.
If the error is not cancelled, turn
the printer off and on again.
List of Printer Messages
Table 1-7. Error Message and Troubleshooting
Message
Explanation
The photoconductor unit of the
Photocon Trouble uuuu
specified color is out of order.
The toner cartridge of the
specified color is not
installed. Or it is not
installed correctly.
Install uuuu TnrCart
The tape has not been
removed from the toner
cartridge of the specified
color.
The photoconductor unit of
the specified color is not
installed. Or it is not
installed correctly.
Install Photocon uuuu
The tape has not been
removed from the
photoconductor unit of the
specified color.
The toner cartridge of the
Wrong Toner uuuu
specified color is invalid
(different destination).
Printing has stopped because
the toner cartridge of the
specified color has reached
Replace Toner uuuu
its lifetime.
Cannot be cleared by the
Start/Stop switch.
The waste toner box is not
Install Waste Toner Box
installed. Or it is not installed
correctly.
The photoconductor unit of the
Wrong Photocon uuuu
specified color is invalid
(different destination).
Revision D
Remedy
1. Replace the photoconductor
unit of the specified color
with a normal one.
2. Replace with a new
photoconductor unit.
If the error is not cancelled, turn
the printer off and on again.
Install the toner cartridge for
the specified color.
If a toner cartridge is
installed, remove it, remove
the tape, and reinstall it.
Install the photoconductor
unit for the specified color.
If a photoconductor unit is
installed, remove it, remove
the tape, and reinstall it.
Replace with a legitimate toner
cartridge.
Replace with a new toner
cartridge of the specified color.
Install a waste toner box.
Replace with a legitimate
photoconductor unit.
25
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents