Epson AcuLaser C9200N Service Manual page 125

EPSON AcuLaser C9200N
E630: IDC SENSOR (FRONT) FAILURE
Relevant Electrical Parts
IDC Sensor
Step Action
1 Check that the IDC Sensor is properly
installed and correct as necessary.
2 Check if the IDC sensor is dirty and
correct as necessary.
3 Check the IDC Sensor connector for
proper connection and correct as
necessary.
4 Check the PWB-M connector for
proper connection and correct as
necessary.
5 Change the cable that connects IDC
Sensor and PWB-M.
6 Change the IDC Sensor.
Troubleshooting
Connection Diagram
Location
Control Signal
(electrical parts)
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Service Call Error
E631: IDC SENSOR (BACK) FAILURE
Relevant Electrical Parts
IDC Sensor
Step Action
1 Check that the IDC Sensor is properly
installed and correct as necessary.
2 Check if the IDC sensor is dirty and
correct as necessary.
3 Check the IDC Sensor connector for
proper connection and correct as
necessary.
4 Check the PWB-M connector for
proper connection and correct as
necessary.
5 Change the cable that connects IDC
Sensor and PWB-M.
6 Change the IDC Sensor.
Revision D
Connection Diagram
Location
Control Signal
(electrical parts)
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
125
Confidential