EPSON AcuLaser C9200N
C6
D6
[2]
Before replacing the Fusing Unit, ensure that it has had time to cool down.
1. Turn OFF the Main Power Switch and unplug the power cord from the power outlet, then
wait for about 20 minutes.
2. Open the Front Door.
3. Remove two Claws [1], and remove the Exit Tray Connector protective cover [2].
4. Disconnect the Connector [3].
DISASSEMBLY AND ASSEMBLY
Fusing Unit
[1]
4039F2C010DA
[3]
4039F2C011DA
Main Unit Disassembly/Reassembly
[5]
5. Remove the Screw [4], and remove the Connector protective cover [5].
6. Disconnect two Connectors [6].
Revision D
[4]
4039F2C012DA
[6]
4039F2C013DA
238
Confidential