Abcde; 4-Color; Low Image Density (Decrease Of Id) - Epson AcuLaser C9200N Service Manual

EPSON AcuLaser C9200N
<4-COLOR>

LOW IMAGE DENSITY (DECREASE OF ID)

A. Typical Faulty Images
B. Troubleshooting Procedure
Step Section Check Item
1 Paper Paper is damp.
2 Transfer Belt Terminal is dirty.
Unit
3 2nd Transfer 2nd Transfer Roller is
Roller installed properly.
4 Charge Neutralizing Cloth is
not separated and ground
terminal is connected
properly.
5 IDC Sensor Sensor is dirty.
6 Replenish Execute the "Toner Admix" in
Toner the Maintenance Menu to
charge toner.
7 Adjust Density Change the setting value for
"Max Density" in the Printer
Adjust Menu.
Troubleshooting

ABCDE

ABCDE
ABCDE
ABCDE
ABCDE
4036fs4036c0
Result Action
YES Change paper to one just
unwrapped from its package.
Install Paper Dehumidifying
Heater.
YES Clean.
NO Reinstall.
NO Correct or change.
YES Clean with blower brush.
NO Go to next step.
NO Go to next step.
Step Section
8
Image quality problem
Check Item Result
The problem has been NO Change Transfer Belt Unit.
eliminated through the checks (p.162)
→
of steps up to 6.
(p.198)
→
(Image Transfer,
Neutralizing).
Revision D
Action
Change Controlzler Board.
Change High Voltage Unit
(p.230)
149
Confidential