EPSON AcuLaser C9200N
[13]
7. Repeat the steps from 5 to 6 and remove the IDC sensor/2 (rear side) [13].
DISASSEMBLY AND ASSEMBLY
4038F2C173DA
C H E C K
P O I N T
1. Snap of the E-ring [1], and remove paper feed clutch [2].
2. Remove the Gear [3].
Main Unit Disassembly/Reassembly
D3
[2]
The separation roller should be replaced, whenever the feed roller is replaced.
Revision D
Feed Roller (MP tray)
[1]
4038F2C004DA
[3]
4038F2C005DA
218
Confidential