Epson AcuLaser C9200N Service Manual page 114

EPSON AcuLaser C9200N
E200: TRANSFER BELT SEPARATION
Relevant Electrical Parts
1st Image Transfer Pressure/Retraction
Position Sensor (PC6)
1st Image Transfer Pressure/Retraction
Clutch (CL3)
Step Action
1 Check the M1 connector for proper
connection and correct as necessary.
2 PC6 I/O check, Sensor check
3 CL3 operation check
4 M1 operation check
5 Change PWB-M (p.198)
Troubleshooting
Main Motor (M1)
Mechanical Control Board (PWB-M)
Connection Diagram
Location
Control Signal
(electrical parts)
--- ---
--- ---
PWB-M CNDM1-11 (ON) K to L-2
PWB-M CNDM1-5 (REM) K to L-2
PWB-M CNDM1-8 (LOCK)
--- ---
Service Call Error
E210: 2ND TRANSFER ROLLER SEPARATION
Relevant Electrical Parts
Mechanical Control Board (PWB-M)
Step Action
1 Check the connector of motor for
proper connection and correct as
necessary.
2 Change Right Door (p.260)
3 Change PWB-M (p.198)
E220: TRANSFER BELT UNIT NEW ARTICLE RELEASE
Relevant Electrical Parts
Mechanical Control Board (PWB-M)
Step Action
1 Reinstall the Unit.
2 Change PWB-M (p.198)
Revision D
Right Door
Connection Diagram
Location
Control Signal
(electrical parts)
--- ---
--- ---
--- ---
Connection Diagram
Location
Control Signal
(electrical parts)
--- ---
--- ---
114
Confidential