Epson AcuLaser C9200N Service Manual page 327

EPSON AcuLaser C9200N
UPDATE METHOD 4
Required Tool
USB memory stick
Control Panel Special Operation
Required
Step Explanation
1 Print a status sheet, and check the current
version.
2 Turn the printer OFF.
3 Insert the USB memory stick stored the
firmware data file (RCX or EFU format) to
the USB host I/F of the printer.
Store the only firmware data
file to update to the USB
memory.
Store the firmware data to the
root directory of USB memory
stick.
4
Turn the product ON while holding down
the [Job Cancel] + [Up] buttons.
F/W Update Mode is started up.
ADJUSTMENT
Step
5
Panel display
---
---
---
6
---
7
Firmware Update
Explanation
Enter the password set in the [Password
Config Menu]. If the password is not set,
press the [OK] button.
The firmware data file in the USB memory is
searched.
Select [Update] and press the [OK] button.
After the confirmation screen is displayed,
select [Yes] and press the [OK] button.
Revision D
Panel display
F/W Update Mode
Password
F/W Update Mode
Serching Files
Please Wait
F/W Update Mode
Update
File
New Version
Old Version
F/W Update Mode
Update
Execute
File
No
New Version
Yes
Old Version
327
Confidential