Epson AcuLaser C9200N Service Manual page 239

EPSON AcuLaser C9200N
[8]
[7]
7. Open the Right Door.
8. Open the Fusing Unit Cover.
9. Remove two Screws [7], and remove the Fusing unit [8].
DISASSEMBLY AND ASSEMBLY
4039F2C014DA
Main Unit Disassembly/Reassembly
C7 D7
[1]
The Transfer Belt Unit is included in "Transfer Kit" as a service part. Additionally, the
C H E C K
P O I N T
2nd Image Transfer Roller, Ozone filter, and Dust Filter are also included in "Transfer
Kit". Replace them at the same time. Refer to
"MAINTENANCE") (p331))
After the Transfer Belt Unit has been removed from the Main Unit for other purposes
than replacement, make sure to put it in the shipping plastic sheet whose color is
black, or wrap it in the light shielding cloth and store it in a dark place.
1. Open the Right Door.
2. Remove two Screws [1] and release the Lock of the Transfer Belt Unit [2].
Revision D
Transfer Belt Unit
[2]
4039F2C005DA
(Refer to Chapter 6
Confidential
239