Epson AcuLaser C9200N Service Manual page 111

EPSON AcuLaser C9200N
Code Item
E702 Standard cassette Elevator failure
E703
Optional Cassette1 Elevator failure
E704
Optional Cassette2 Elevator failure
E900
Flash ROM write error
E901 RTC failure
E998 Engine communication error
Troubleshooting
Table 3-16. Error Code List
The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been
started.
The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been
started.
The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been
started.
Flash ROM writing is found faulty during a check.
The correct access to the RTC Board is failed during access.
The correct access between the Controller Board and the Mechanical Control Board are failed during access.
Service Call Error
Detection Timing
Revision D
Reference
p.127
p.128
p.128
p.128
111
Confidential