Epson AcuLaser C9200N Service Manual page 243

EPSON AcuLaser C9200N Revision D
[3]
[5]
[4]
4. Remove the Fusing Drive Assy pushing upward [5] the connection part of the Transfer Belt
from the right Door side.
2. Remove three Screws [3] from the rear side of the Main body.
3. Release the hook section of the Spring from the groove to the rear side from upper part of
Main Unit of the right rear side.
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 243
Confidential