Epson AcuLaser C9200N Service Manual page 270

EPSON AcuLaser C9200N
3. Put the Near Empty Assy [2] through the hole of the Flame bringing down the Near Empty
[2] Assy to the rear side from the front side.
DISASSEMBLY AND ASSEMBLY
[2]
Main Unit Disassembly/Reassembly
[3] [4]
4. Remove two Connectors and remove the Near Empty Assy.
When installing, insert the white Connector into the Connector of the front side [3]
and insert the blue Connector into the Connector of the rear side [4].
Revision D
270
Confidential