Servo Reverse "Rev - FUTABA 4PL-2.4GHZ Instruction Manual

Servo Reverse "REV"

This function reverses the direction of operation of the servos related to transmitter
steering, throttle, and channel 3 /4 operation.
Channel menu display
Display to each channel menu by the following method:
Select MENU
(STEERING 1 menu screen)
Servo Reverse Function Setting
(Preparation)
Move the cursor to REV by (UP) or (DN) button
1
(Servo reverse setting)
Use the (+) or (-) button to reverse the servo operation direc-
tion.
(Each channel can be set similarly.)
2
When ending, return to the menu screen by pressing the (CT)
button.
44
However, when the position set by trim or subtrim shifts from
the center, the center becomes the opposite side.
CT
(HOME screen)
Move the cursor to
*STEERING by (UP)
or (DN) button and
press the (CT) button.
Move the cursor to
*THROTTLE by (UP)
or (DN) button and
press the (CT) button.
Servo Reverse "REV"
On the menu screen, press the (UP) or (DN)
button and select the STEERING, THROT-
TLE, CH3 and CH4 channel.
(MENU screen)
CT
Channel menu screens
(THROTTLE 1 menu screen)
(All channel)
UP DN
(CH3/CH4 menu screen)
Reverse Function selection
- Move the cursor to REV by (UP)
or (DN) buttons.
Select button
- Select with the (+) or (-) but-
tons.